Planning a reroof, gutter replacement or roof repair in Wellington? Organising roof edge protection early helps your roofer coordinate the job and avoids discovering access problems on the day work is due to start.
This checklist explains what to prepare before requesting hire. For the service itself, see Edge Protection Wellington. The right system and installation plan depend on the roof, the work and the site; a photograph or a perimeter measurement alone is not a safety assessment.
1. Explain the Roofing Work, Not Just the Roof Size
Tell the team whether you are replacing roofing, repairing a small area, working on gutters or installing solar panels. Include the property address, number of storeys, approximate roof shape and any available plans.
The work can affect where protection is needed and how it can be supported. Replacing fascia boards, for example, may conflict with a proposed attachment position. Mention any cladding, guttering or roof-edge components that the trades plan to remove so the installation can be considered alongside the job sequence.
If the roof has skylights, fragile sheets or openings, flag these too. Perimeter edge protection does not address every roof hazard. The roofing contractor and protection provider need to agree how the full work area will be managed.
2. Send Useful Site Photos
A useful enquiry includes photographs of each side of the building, the roofline and the route from the street to the work area. Take these from a safe position on the ground; do not climb onto a roof to obtain a quote.
Point out:
- Sloping ground, retaining walls and changes in level
- Narrow side passages, steps, gates and shared driveways
- Conservatories, decks, garages or other structures below the roof edge
- Nearby power lines, public footpaths and neighbouring property
- Areas where occupants or vehicles need continued access
These details are particularly helpful on Wellington's hillside sections. A straightforward-looking roof can still require a more involved access and installation plan.
3. Coordinate Installation With Your Roofer
Share the proposed start date, expected duration and the roofer's contact details. Ask when the protection needs to be installed and checked before roof work begins, and allow for that in the programme.
For a reroof, discuss how materials will reach the roof and how old roofing will be removed. Edge protection and working platforms serve different purposes: guardrails do not automatically provide the access, loading area or platform that a roofing crew needs. If the job also needs scaffold access, discuss reroofing scaffolding in Wellington as part of the same assessment.
Keep the protection in place until the work requiring it is complete and removal has been agreed. If the schedule changes, contact the hire provider before the planned collection date.
4. Allow for Wellington Wind and Weather
Exposed Wellington sites need weather planning, not a promise that a guardrail makes roof work safe in all conditions. Discuss who will monitor conditions, when work must stop and who should be contacted if the system is affected by severe weather or an impact.
Do not attach tarpaulins, signs, mesh or shrinkwrap to edge protection without the provider's approval. Additional coverings change wind loads and may require a different design. Workers should not move supports or remove rails to make room for deliveries; arrange any alterations with the installer.
If anything appears loose, damaged or changed, keep people away from the affected work area and ask for it to be assessed before use resumes.
5. Ask What the Hire Quote Includes
There is no single price that suits every Wellington roof. Roof perimeter, height, system suitability, site access, installation requirements and hire duration all affect the scope.
Ask for a written quote that identifies:
- Delivery, installation and dismantling
- The roof edges and work areas covered
- Any separate scaffold access or working platforms
- The included hire period and charges for additional time
- Any agreed inspections, alterations or return visits
- GST and any access or travel allowances
Give each provider the same job details if you are comparing quotes. A lower total may represent a different scope rather than the same protection at a better price.
6. Confirm Handover and Responsibilities
Before the roof work starts, confirm that the installation has been checked and that your roofer understands its intended use and any limitations. Agree who will arrange ongoing checks, report damage and coordinate changes.
Homeowners should not install, adjust or dismantle a hired system themselves unless that is explicitly part of an appropriate, agreed arrangement. Leave decisions about system selection and installation to competent people assessing the actual site. This article is a booking guide, not a substitute for a site-specific safety plan.
Ready to Arrange Roof Edge Protection?
Have your address, ground-level photos, roofing scope and expected dates ready. Erect It can discuss the requirements and prepare a site-specific quote through the Wellington edge protection team.
Request a quote and mention any tight access, sloping ground or planned fascia and gutter work so these can be considered from the outset.
Need scaffolding for your project?
Get a free, no-obligation quote from Greater Wellington's SiteWise Gold 2026/27 certified scaffolding specialists.